Cell Culture Flasks
Ace Glass, Inc. Flask, trypsinizing, 35mL, baffled, #1 stopper size beaded neck cs/3
35mL trypsinizing flask with beaded neck and long side baffles. Ideal for converting homogenous tissue samples into cell suspensions by digestion of connective tissue. Heavy beaded neck accepts either cotton plugs or stoppers. The extra-deep baffles enhance vigorous agitation.
Bellco Glass, Inc. Trypsinizing Flask, 4 L
Manufactured from type 1 class a Borosilicate glass. Designed with deep side baffles for optimal agitation. Large bottom surface for easy access with Bellco large orifice pipette. MADE IN THE USA.Break resistant lipSize: 4lOD x OAH – 205 x 360mm2 per case
Bellco Glass, Inc. Trypsinizing Flask,500mL
Manufactured from type 1 class a Borosilicate glass. Designed with deep side baffles for optimal agitation. Large bottom surface for easy access with Bellco large orifice pipette. MADE IN THE USA.Break resistant lipSize: 500mLOD x OAH – 100 x 183mm3 per case
Chemglass Life Sciences Flask, Trypsinizing, 4L, 205mm Dia x 360mm OAH
Flask, Trypsinizing, 4L, 205mm Dia x 360mm OAH. Manufactured from Type 1 Class A borosilicate glass with FOUR deep side baffles for optimum agitation during trypsinization. Flask comes with beaded, break-resistant lips and 50mm OD necks. Sold 1 per case.
Bellco Glass, Inc. Trypsinizing Flask,125mL
Manufactured from Type 1 Borosilicate Glass. Designed with deep side baffles for optimal agitation. Promotes enzyme digestion of tissue fragments and homogenates into cell suspense. Includes rubber lined black phenolic screw caps. Integral dam contains non-trypsinized tissue during decanting. MADE IN THE USA.Specifications:Type 1 Class A Borosilicate GlassSize: 125mlSidearm Cap: 16mmAcid Etched & Filled GraduationsScrew Cap: 24mmOD X OAH (mm): 66 X 135Case Qty:3
Chemglass Life Sciences Spinner Flask Only, 3000mL, Jacketed, BioProcess, Plain Bottom
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Chemglass Life Sciences Spinner Flask, 25mL, Flat Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Bellco Glass, Inc. Bell-Flo Complete, 100mL
Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. MADE IN THE USA. Bottom indents & three vertical baffles for optimal mixing 32mm or 45mm sidearms for port assemblies Rugged stainless steel/PTFEinternal bearing assemblies. CENTER CAP:70MM, SIDEARM CAP:32MM, -OAH X OD:150 X 65
Chemglass Life Sciences BioProcess Spinner Flask, 500mL, Dimpled Bottom, Complete
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle.Please Note: The 6L and 8L Versions Do Not Have Dimpled Bottoms.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.
Alkali Scientific Spinner Flask Flat Bottom, 250mL
Flat bottom spinner flasks promote optimal growth of suspension cultures. The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap. Flat bottom vessel 100mL, 250mL, 500mL and 1L. Heavy wall center port and side arms. FDA approved materials. Capacity (mL) Center Neck Sidearm OD x OAH (mm) 100 70 GL 32 70 x 175 250 70 GL 32 85 x 210 500 70 GL 45 110 x 250 1000 100 GL 45 135 x 305 3000 100 GL 45 165 x 355 Spinner flasks are constructed of high quality components with the following specifications: Vessels: Borosilicate type 1 glass Shafts: Borosilicate glass 7mm Magnets: PTFE encapsulated Paddle: PTFE Cap: Polypropylene Compression fitting: Polypropylene Liner: Silicone O ring: Silicone
Bellco Glass, Inc. MicroCarrier Spinner Flask Only, 36L No Ctr Cap
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. OD x oah:410mm x 535mm Flask Only
Bellco Glass, Inc. Water Jacketed Flask Complete, 250mL
For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8″ ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. MADE IN THE USA. Specifications:Jacket Volume (mL): 175mlCap Size: 70mmSidearm Cap Size (mm): 25OD x OAH: 85x160mm